Reliable EP1000 - Manual (Page 13)

1. Turn the trolley upside down in order to
easily screw the rotating back wheels into
the threaded holes (fig. 1).
2. Assemble the wheel in the following
order: washer, chrome back wheel cover,
back wheel, brass wheel cover, chrome
back wheel cover, washer and fix them
with a self-locking nut on the shaft (fig.
2). Screw using the spanner, please be
careful not to close them too tightly.
3. Hold the trolley up and put the steam
cleaner in it. Tilt the machine forward in
order to position the front wheels in their
place. This will allow a correct positioning
of the back wheels also (fig. 3)
4. Put the accessory tray on the trolley
base unit and screw the fixing caps (fig. 4).
11
Fig. 1
Fig. 2
Fig. 3
Fig. 4