Operating instructions, Odgsr series outdoor gas fireplace, Log installation – Vermont Casting ODGSR42A User Manual

Page 9: First firing, Flame adjustment, Flame characteristics

Advertising
background image

9

ODGSR Series Outdoor Gas Fireplace

20007114

Operating Instructions

Log Installation

1. Remove logs from the packaging.

As with all plastic, these bags are not toys
and should always be kept away from chil-
dren and infants.
2. Place left rear log on rear log support.

Ensure that log is firmly positioned and there is no
side-to-side movement. (Figs. 11 & 12)

3. Carefully place Ember Log between grate and

burner. (Figs. 11 & 12)

4. Place the front of right rear log on the burner and the

back of the log on the rear log support.

5. Place the top logs onto the locator notches. Ensure

the logs are secure. (Fig. 11 & 12)

LG317
UVODSR36
logs
11/24/03 djt

Right Cross

Log

Left

Cross

Log

Left Rear

Log

Right

Rear

Log

Ember

Log

LG317

Fig. 11 ODGSR36 log placement.

First Firing

Upon completing the gas line connection, a small
amount of air will be trapped in the line. When first
lighting the unit with pilot light, it will take a few minutes
to purge the trapped air. Once purging is complete, the
pilot and burner will light and operate as indicated in the
instruction manual. Subsequent lightings of the appli-
ance will not require purging.
When lit for the first time, the appliance will emit a slight
odor for an hour or two. This is due to paint and lubri-
cants used in the manufacturing process. After each
lighting, vapor may condense and fog the glass; this
moisture disappears in a few minutes of burning.

Flame Adjustment

For units equipped with Hi/Lo valves, flame adjustment
is accomplished by rotating the Hi/Lo adjustment knob
located near the center of the gas control.

LO

HI

Turn

counterclockwise

to increase

flame height

Turn clockwise

to lower

flame height

FP390

FLAME ADJUSTMENT KNOB

11/21/96

Fig. 13 Flame adjustment knob for SIT820 valve.

Flame Characteristics

It is important to periodically perform a visual check of
the pilot and the burner flames. Compare them to the il-
lustrations below (Figs. 14, 15, 16). If any of the flames
appear abnormal call a service person.

LG318

ODUVSR42

log set

11/24/03 djt

Left Rear

Log

Left Cross

Log

Middle Cross Log

Right Cross

Log

Right Rear

Log

Log Left

Ember

Grate

Fig. 12 ODGSR42A log placement.

LG318

Log

Right

Ember

Advertising
This manual is related to the following products: