Canon BJC-8200 - Manual (Page 22)

Now you are ready to use the Scanner Cartridge installed in the printer to scan the original
photograph.
Click the Capture Photo button.
Set the original in the scanning holder.
Set the scanning holder with the original in the Sheet
Feeder.
1 Slide the paper guide completely to the left.
2 With the closed end of the scanning holder pointing down and the
original facing up, align the scanning holder with the right side of
the Sheet Feeder.
3 Slide the paper guide to the left edge of the scanning holder.
Click the Scan button.
• You can start the scanning job here without making any settings.
• The Sheet Feeder feeds the scanning holder in small increments as
it scans the original.
• The scanned image is displayed in the Preview Area.
4.
3.
2.
1.
20
Click the OK button.
• The white level calibration sheet feeds into the printer. When the
sheet is ejected, white level calibration has completed.
Click the Cancel button, then click the Back button to
return to the main menu.
7.
6.
Scan the original photograph
3 3
Click!
Click!
Click!
Click!
chap-1 (E) 10/2/99 6:09 AM Page 20