The wireless tab - wireless mac filter – Linksys WRT54G User Manual

Page 32

Advertising
background image

23

Chapter 6: Configuring the Wireless-G Broadband Router
The Wireless Tab - Wireless MAC Filter

Wireless-G Broadband Router

The Wireless Tab - Wireless MAC Filter

Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your
network’s radius.

Wireless MAC Filter. To filter wireless users by MAC Address, either permitting or preventing access, click the
radio button beside Enable. If you do not wish to filter users by MAC Address, select Disable.

Prevent. Clicking this button will Prevent users access by MAC Address.

Permit Only. Clicking this button will Permit users access by MAC Address.

Edit MAC Address Filter List. Clicking this button will open the MAC Address Filter List. On this screen, you can
list users, by MAC Address, to whom you wish to provide or block access. The Wireless Client/MAC List button
will display network users by MAC Address for easy reference.

Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes
to cancel your changes.

Figure 6-17: MAC Address Filter List

Figure 6-16: Wireless Tab - Wireless MAC Filter

Advertising