Linksys WRT54G - Manual (Page 37)

28 Chapter 6: Configuring the Wireless-G Broadband Router
The Security Tab - Wireless Security
Wireless-G Broadband Router
Radius. WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is
connected to the Router.) First, enter the RADIUS server’s IP Address and port number, along with a key shared
between the Router and the server. Then, select a WEP key and a level of WEP encryption, and either generate a
WEP key through the Passphrase or enter the WEP key manually.
WEP. WEP is a basic encryption method, not as secure as WPA. To use WEP, select a WEP key and a level of WEP
encryption, and either generate a WEP key through the Passphrase or enter the WEP key manually.
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes. For detailed instructions on configuring wireless security for the Router, turn to
Appendix B: Wireless Security.
Figure 6-23: Wireless Tab - Wireless Security (Radius)
Figure 6-24: Wireless Tab - Wireless Security (WEP)