Linksys WRT54G - Manual (Page 43)

34 Chapter 6: Configuring the Wireless-G Broadband Router
The Administration Tab - Factory Defaults
Wireless-G Broadband Router
The Administration Tab - Factory Defaults
Click the Yes button to reset all configuration settings to their default values, and then click the Save Settings
button. Any settings you have saved will be lost when the default settings are restored. This feature is disabled by
default.
The Administration Tab - Firmware Upgrade
Firmware can be upgraded by clicking the Upgrade button after browsing for the firmware, which you can
download from the Linksys website. Do not upgrade your firmware unless you are experiencing problems with
the Access Point. For more information about upgrading firmware, refer to "Appendix C: Upgrading Firmware".
Figure 6-35: Administration Tab - Factory Defaults
Figure 6-36: Administration Tab - Firmware Upgrade