Connecting the lcd to your pc – Sceptre X240-1920T User Manual
Page 14
Page14
SCEPTRE X240
Connecting the LCD to Your PC
If You Have DVI Connection on Your Video Card…
1.
Make sure the power of X240 LCD MONITOR is turned off.
2.
Obtain a DVI cable and connect to the DVI connection on your PC. Connect the other
end of the cable to your X240 LCD MONITOR.
3.
Obtain the audio cable and connect the 3.5 mm Mini-jack cable to the Audio Line In
connection of the monitor. Connect the other end of the 3.5 mm Mini-jack cable to your
PC’s audio line out connection.
4.
Turn on the power of both the X240 LCD MONITOR and the PC.
Please Note :
•
Some video cards may have their DVI connection turned off by default. If you do
not get video, please consult your video card’s technical support.
•
The PC’s clearest picture is produced under 1920x1080 at 60Hz.
•
Some models may not have Audio Line In as an available connection.