Sceptre X240-1920T User Manual
Page 17
SCEPTRE 240 Page17
SOURCE
This function lets you switch the source from VGA to DVI or vice versa.
1.
You can use this function by pressing
S/A button, and then press the VOL+ button to select
SOURCE. This will change your source to the other connection.
LUMINANCE
This function adjusts the brightness and contrast of the LCD.
1.
To use this function, press
MENU to open the OSD then highlight LUMINANCE function by
pressing the
CH▲ or CH▼ button.
2. Press
MENU to enter the function.
3. Press
CH▲ or CH▼ button to select BRIGHTNESS or CONTRAST to adjust.
4. Press
MENU to select the option you want to adjust.
5. Use
the
VOL+ or VOL– button to adjust the values.
Please Note :
•
BRIGHTNESS adjusts the black level in a picture. If the value is adjusted too high,
the picture will look washed out. If too low, the picture will not have much detail in
dark colors.
•
CONTRAST adjusts the white levels in a picture. If the value is adjusted too high,
the picture will not have any details in bright parts of the picture. If set too low,
the picture will looked washed out.