Sceptre X240-1920T User Manual
Page 15
SCEPTRE 240 Page15
If You Have VGA Connection on Your Video Card…
1.
Make sure the power of X240 LCD MONITOR is turned off.
2.
If you were previously using a CRT (bulky) monitor, please hook up your old
monitor first and make sure your refresh rate is set to 60 Hz frequency before using the
X240 LCD MONITOR. You can find the refresh rate information and change it by
RIGHT CLICKING on the desktop with nothing selected. After you have right clicked,
select the PROPERTIES option. Click on the SETTINGS tab. Click on the ADVANCED
button. Click on the MONITOR tab. In that tab, change the refresh rate to 60Hz and
click on APPLY. After the refresh rate changed, please shut down the computer and
monitor.
3.
Obtain the VGA cable and connect to the VGA connection on your PC. Connect the
other end of the cable to your X240 LCD MONITOR.
4.
Obtain the audio cable and connect the 3.5 mm Mini-jack cable to the Audio Line In
connection of the monitor. Connect the other end of the 3.5 mm Mini-jack cable to your
PC’s audio line out connection.
5.
Turn on the power of both the X240 LCD MONITOR and the PC.
Please Note :
•
The PC’s clearest picture is produced under 1920x1080 at 60Hz.
•
Some models may not have Audio Line In as an available connection.