Sceptre CCR2000 - Manual (Page 11)

11 | P a g e
Video Menu
1. VIDEO
a. QUALITY – This option adjusts the quality of the picture between normal and super fine.
b. RESOLUTION – This option adjusts the resolution of the video between 1080P to 480P.
c. VIDEO DURATION – This option adjusts the duration of each video file recorded.
d. LOOP VIDEO – This option disables or enables video files to be recorded over when the SD card
memory is full.
e. CRASH SENTIVITY – This option adjusts how sensitive the CCR2000’s G sensor will be in
detecting a collision.
f. PARKING MODE – This option turns on or off the sensor automated recording function where if the
car is struck while parked, the CCR2000 will automatically start recording. The one minute option
tells you that the CCR2000 once detecting a collision while the car is parked, will record for 1
minute before shutting off.
g. UPSIDE DOWN – This option will invert the video.
h. FLICKER – This option adjusts the flicker of the video between 60 Hz and 50 Hz.
i. CONTRAST – This option adjusts the contrast of the video recording.
j. SHARPNESS – This option adjust the sharpness of the video recording.
k. ISO – This option adjusts the sensitivity of the sensor. The higher the value the brighter and
grainier the video.
l. WHITE BALANCE – This option adjusts the white balance of the video between bluish to greenish.
m. EXPOSURE – This option adjusts the brightness of the video.
n. METER MODE – This option adjusts how the sensor evaluates the brightness of the video.
2. SETTINGS
a. LCD OFF – This option adjusts the time it takes for the LCD to automatically turn off.
b. AUTO POWER OFF – This option adjusts the time it takes for the CCR2000 to automatically turn
off.
c. TIME SETUP – This option lets you set up the time and date.
d. VOLUME – This option adjusts the volume of the CCR2000.
e. RESET SYSTEM SETTINGS – This option resets all options back to default.
f. FORMAT – This option formats the SD card, thereby erasing all its internal contents.
g. LANGUAGE – This option lets the user select the menu language between Chinese, English, and
Spanish.
h. STAMP – This option turns on or off the time stamp while recording the video.
i. BEEP SOUND – This option enables or disables the all sound the CCR2000 makes.
j. FIRMWARE VERSION – This option checks the firmware version of the CCR2000.
k. TIMEZONE – This option lets you check the time zone.
l. ABOUT – This option displays Sceptre’s information.