Sceptre CCR2000 - Manual (Page 14)

14 | P a g e
Troubleshooting
Problems Solutions
THE CCR2000 IS
NOT
RECORDING Make sure the CCR2000 has power in the battery or is plugged in with a power
cord.
Make sure the SD memory card itself is not in write protect mode.
Make sure the CCR2000 is turned on by pressing and holding the power button
for 3 seconds.
Make sure the CCR2000 is not connected to a computer.
Make sure the SD card is not full of data.
Make sure the option LOOP VIDEO is enabled in the CCR2000 video menu.
Make sure the SD card is working. If not replace the SD card with a new one to
see if it works.
THE CCR2000 IS
NOT TURNING
ON Make sure the CCR2000 has power in the battery or is plugged in with a power
cord.
Make sure the weather condition is not extremely cold (under 50 F).
THE VIDEOS
AND PICTURES
ARE BLURRY Clean the CCR2000’s lens by following the methods stated under
MAINTENANCE.
THE SOUND IS
NOT BEING
RECORDED Make sure when you are recording video with the CCR2000 there is no red X
mark on the speaker icon on the LCD screen. Press the UP direction button to
remove the red X.