Additonal functions, 12 | p a g e – Sceptre CCR2000 User Manual
Page 12
12 | P a g e
Additonal Functions
1.
OUTPUTTING TO HDMI
a.
Obtain an USB to mini-USB cable and connect the USB end to your computer and the mini-USB end to the
CCR2000.
b.
Your computer will detect an additional drive where you can access your recorded files.
2.
CONNECTING THE CCR2000 TO A PC TO RETRIEVE VIDEO
a.
Obtain a mini-HDMI to HDMI cable and connect the mini-HDMI to the CCR2000 and connect the HDMI end to
your HDTV.
b.
Turn on the CCR2000 and change your HDTV source to the HDMI port you have connected to. Use the UP
button to play your video or picture files and they will show up on the HDTV.
3.
READING THE SD CARD DIRECTLY
a.
Eject the SD memory card by pushing the card in until you hear a minor click sound and the card will eject
automatically.
b.
Insert the SD memory card to your SD memory card reader and connect the reader to your computer.
c.
Turn on your computer and the computer will detect an additional drive where you can access your recorded
files.
4.
Setting G Sensor Automatic Functions
a.
The CCR2000 will automatically lock the currently recording video file if the sensor detects a collision.
i. Make sure CRASH SENSITIVITY is turned on under the VIDEO menu.
ii. The locking function will lock video files 5 minutes prior to the collision, 5 minutes during the collision
and 5 minutes after the collision.
b.
While your car is parked, if the CCR2000 detects a collision, it will automatically start recording.
i. Make sure CRASH SENSITIVITY is turned on under the VIDEO menu.
ii. Make sure PARKING MODE is turned to 1 min or 2 min under the VIDEO menu.
iii. Make sure LCD OFF under the SETTINGS menu is turned OFF.
iv. Make sure AUTO POWER OFF under the SETTINGS menu is turned OFF.
v. Make sure the battery power is fully charged (a full charge will last 2-3 hours).
vi. If this function is on, the indicator light is solid blue. When the CCR2000 is recording the indicator
light is blinking blue.
vii. This function will only be turn on after the car engine shut off and the CCR2000 is connected to car
charger. this function will not turn on if user manually stop the recording.
5.
SYSTEM RESET
a.
In the event that the unit is not working correctly you can always reset the device by inserting a metallic pin to
the RESET hole next to the SD card. After 3-5 seconds the device will reset.