SeaLand TankWatch 4 Level Monitoring System User Manual

Page 2

Advertising
background image

2

TAbLE Of CONTENTS

SAfETY INSTRuCTIONS

WARNING: When using this device, always exercise basic safety precautions, including the following:

Read all instructions before installation or use.

Never connect this device to any electrical circuit with other than 2 or 24 volt Direct Current or exceed

the amperage draw listed below.

Never install the indicator panel in an atmosphere with potentially flammable or explosive vapors.

Never install the probe cap with float switches into a tank that contains anything other than fresh, gray or

black water.
CAuTION: Dropping or rough handling of float switches may result in damage.

PRODuCT fEATuRES

Eliminates false reading from fouled probes.

Three float switches, four level indications for all tanks up to 22-inch (559mm) and 45-inch (114cm) in depth.

Deluxe panel complements bathroom decor and provides international symbology.

Installs in any rigid tank with optional 3-inch NPT mounting flange.

One model operates on 2 or 24 VDC.

Probe cap provides clean-out fitting for easy access to interior of tank.

Cap is available with or without 5/8" vent hose connection.

Optional shut-off relay plugs into back of circuit board to shut down toilet or water system when gray or

black water tank is full or when freshwater tank is empty.

Always one level light on to confirm that electrical power is applied.

Only one level light on at a time to eliminate confusion and save battery power.

CE and IMCI approved for electromagnetic compatibility.

The TankWatch 4 Level Monitor System is designed to permit remote sensing of liquid levels in wastewater,

gray water or potable fresh water tanks. The TankWatch 4 utilizes three micro-float switches, which activate a

four-light panel. One is fixed and activates a full light when the liquid is within approximately 2-inches of the top

inside surface of the tank. The other two float switches are mounted on adjustable stems and can be posi-

tioned to within 2-inches of the bottom of the tank. The stems are semi-flexible and are designed to flex with

the sloshing of the tank contents. A simple procedure allows one adjustable stem to sense when the tank is

empty and the other adjustable stem to sense when the tank is 1/4 or 1/2 full, depending on the application.

MODELS AND ACCESSORIES

Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . 2

Product Features. . . . . . . . . . . . . . . . . . . . . . . . . 2

Models and Accessories . . . . . . . . . . . . . . . . . . . 2

Dimensional Specifications . . . . . . . . . . . . . . . . . 3

Product Specifications. . . . . . . . . . . . . . . . . . . . . 3

Installation Instructions . . . . . . . . . . . . . . . . . 4 - 5

Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . 6

Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Manufacturer’s One-Year Limited Warranty . . . . 8

Control Panel Mounting Template

336003

336004

313600115

336006

307230272

60034292

600342490

385318714

36060022

360600224

TankWatch

®

4 Panel and Cap with Vent, 22-inch Probes

TankWatch

®

4 Panel and Cap without Vent, 22-inch Probes

TankWatch

®

4 Panel and Cap with Vent, 45-inch Probes

TankWatch

®

4 Panel and Cap without Vent, 45-inch Probes

Universal Flange (3-inch NPT) with gasket and stainless steel hardware

Plug In Relay, 2VDC

Plug In Relay, 24VDC

“Do Not Flush” Panel

TankWatch

®

4 Panel with 2VDC Relay

TankWatch

®

4 Panel with 24VDC Relay

Part Number

Description

Advertising