SeaLand TankWatch 4 Level Monitoring System - Manual (Page 7)

7
PARTS LIST
NOTE: If it is necessary to remove or replace the Float
Switch Assembly (item 4) be sure to use the O-ring and
tighten switch to 8-0 inch-lbs. Over-tightening is not
necessary and will cause damage to the parts.
Part
Number

2
3
4
5
6
6
7
8
9
0

2
600342260
385310258
600347587
600340425
600342238
6003424
600342115
600342262
600343657
600340423
600340424
385230268
385230930
Wire Cover, Pull Tab Cap
Compression Nut/Washer Kit
Cap O-Ring
Reed Switch Stem (threaded)
Polyethylene Tubing
Adjustable Level Cap with Vent
Adjustable Level Cap without Vent
Wire Cover, Pull Tab Cap
Reed Switch Stem (barbed)
Reed Float
Ring Clip
Float Stem Kit (incl. items 4, 9, 10)
Probe Kit (incl. items 5, 8-10)
TankWatch 4 Probe Cap Item Description
TankWatch 4 Panel Item Description
Universal Flange Adapter Item Description
Part
Number
Part
Number

2
3
4
5
6
7
8
9
*0
600342400
60034047
600343662
60034366
600342495
600343598
600342494
600342493
600340488
385310693
60034292
600342490
385310666
Housing, Indicator Panel
Screw, #6 x 1" Phillips, Oval Head
TankWatch 4 Face Plate - Black
TankWatch 4 Face Plate - White
Lens, Green
Lens, Yellow
Lens, Amber
Lens, Red
Screw, #6 x 3/8" Pan Head, Phillips
TankWatch 4 Control Panel
Optional 2VDC Relay
Optional 24VDC Relay
TankWatch 4 Indicator Panel
(items 1-9) (not shown)

2
3
600340406
600340407
307230272
Universal Mounting Flange
Universal Mounting Flange Gasket
Universal Mounting Flange Kit
(Complete with items 1, 2, mounting
hardware and instructions.)
* Standard with Part Nos. 36060022 and 360600224 only.