Shelving installation, Cleaning, Burn in – Shellab SVAC9-2 User Manual
Page 12: Installation (continued)
12 |
P a g e
Figure 6: Shelving Clips
INSTALLATION (CONTINUED)
S
HELVING
I
NSTALLATION
Perform the following steps to install the oven shelves:
1. Install the shelf clips in the slots located on the sides of the chamber interior, four (4) per
shelf.
2. Squeeze each clip, insert the top tab first, and then the bottom tab using a rocking motion.
3. Hang the metal shelves from the clips.
C
LEANING
The oven interior was cleaned at the factory but not sterilized. See the
topic in the User
Maintenance section for more information.
B
URN
I
N
The oven should be run through a burning in process before being used for normal operations. This
is done to eliminate smoking from the protective coatings on the oven’s heating elements at
temperatures above 150
˚C. Please see the