Smartek ST-X500 - Manual (Page 11)

Page10 Steam press Instruction Manual
STEP 8 - CLEANING (As required)
a. Cleaning the Pressing Plate: Place the Pressing Cushion in the center of the Ironing
Board. Place a clean towel over the Pressing Cushion and the Ironing Board. Set the
Steam Control and Temperature Control to their maximum setting. When the Ready
Light comes on, gently lower the Pressing Plate onto the Pressing Cushion. With
water in the reservoir tank, press the Steam Burst Control 6 to7 times. Be careful to
avoid touching the hot metal surfaces or leaving your hand in the bursts of steam.
b. Once the Pressing Plate has cooled down you can clean the surface with a damp cloth.
DO NOT use any abrasives on the Pressing Plate.
c. The Ironing Board Cover is removable for normal washing. You can rinse the Ironing
Board Cover with mild detergent and warm water.