Т³гж 17 – Smartek ST-X500 User Manual
Page 17
Advertising
Page16
Steam press Instruction Manual
The Pressing Handle will not move into the
Automatic Maximum pressure position.
Item on the Ironing Board is too thick to use
this pressure.
Use lighter pressure on thicker items. Use
added steam for wrinkles.
Water drips from the Pressing Plate.
Temperature Control Dial has not been set
properly.
Steam Button has been pressed too long.
Turn the Temperature Control Dial clock-
wise to a higher temperature.
Don't press the Steam Button more than 5
seconds continuously.
PROBLEM
CAUSE
SOLUTION
No Steam.
Fill the water tank.
Turn the Temperature Control Dial clock-
wise to a higher temperature. Wait for the
Steam Ready light to come on.
Water Level is too low.
Controls have not been properly set.
Advertising