Clarity C4210 - Manual (Page 30)

30
3. Press the UP (
▲
) or DOWN (
▼
) button
to go to the record to be stored to the
EMERGENCY key.
4. Press and hold the EMERGENCY key for
2 seconds.
5. The phone number is copied to the
EMERGENCY key. The LCD will display MEM
STORING for one (1) second and the
handset will give a success keynote.
Dialing the EMERGENCY Number
1. Unit must be in standby mode only.
2. Press the EMERGENCY key once.
3. The display will show the stored name and
number for 5 seconds. Otherwise it will show
-MEMORY EMPTY-.
4. Then the handset goes off-hook and dial out
the stored numbers.
Or
5. Press TALK key to make handset goes off-hook.
6. Press the EMERGENCY key once. The display
will show the stored name and number for 1
sec. Then the numbers will be sent out.
Deleting the EMERGENCY Number
1. Unit must be in standby mode.
2. Press the EMERGENCY key once.
3. If this key has been programmed, the display
will show the stored number. Otherwise, it
will show MEMORY EMPTY.
4. Press DEL/CH key once to delete number.
5. The display will flash DELETE?.
6. Press DEL/CH to delete. The handset will
give a success keynote and the display will
show MEM DELETED.
TELEPHONE OPERATIONS