Snazzy FX CHAOS BROTHER - Manual (Page 10)

BEAT LOCKING PATCH IDEA #1!
!
! LETS SAY YOU HAVE A SEQUENCE YOU REALLY LIKE OF KICK/
SNARE/ AND HAT. !
All these drums are driven by a master clock.!
Well if you feed that master clock into the !
CV IN of the CHAOS BROTHER, and then !
set up a gate sequencer or clock divider !
to FIRE A CONGA module, or a CLAP, !
you can use the THRESHOLD and SPEED controls!
to enable UNPREDICTABLE and ORGANIC triggers to “play” the DRUM in
relation to your master clock, hence play the drum in relation to your other drums,
and therefore end up with a “Live” sounding percussion part.!
!
patch details:!
<<you FIRE THE CONGA by taking the GATE output and plugging it into the
trigger input of the drum module Or you can take your chaotic triggers and feed
them into an envelope generator to Shape and process them…!
!
PATCH IDEA #2!
!
another way to do it is by using a clock divider in your system !
!
(THE 4MS RCD works well for this And there are a few"
CLOCK DIVIDER SNAZZY FX ARDCORE patches too (to start, see A05 clock
divide which has a second trigger input for RESET, the extremely full featured
gate sequencer user Sketch-Tapped Out, etc)!
!
Feed your patch’s’s master clock to the clock divider. Now take an output of the
clock divider and plug it directly into your drum module trigger input OR into an
envelope gen first then into the drum module’s input.!
!
The fun part however is that in this patch we are going to use our Chaotic
triggers to CHANGE THE DIVISIONS each time a trigger is recived. !
On the 4ms RCD this is as easy as plugging our chaotic triggers into the
ROTATE jack. This will keep the drums constantly changing.!
!
There are many other ways to implement this idea but with different equipment.!
!
PATCH IDEA #3 Beat Locked Pattern changes.!