Solberg Scrubbers - Manual (Page 3)

Solberg Manufacturing, Inc., 1151 Ardmore Itasca, IL 60143 USA
Ph: 630.773.1363 Fax: 630.773.0727 Email: [email protected] Web: www.solbergmfg.com
Rev: MM Scrubbers May 2010
Page 3
SOLBERG
Section A
INTRODUCTION
The purpose of this document is to provide instructions for proper assembly and
maintenance of Solberg Scrubbers/Separators.
*WARNING*
This manual must be read and thoroughly
understood before using and maintaining your
scrubber/separator vessel. Failure to comply
could result in explosion, product/system
contamination or personal injury.
This manual should supplement the Operator’s knowledge of scrubber/separator vessel
maintenance. It is the responsibility of the Operator to interpret and explain all
instructions to persons who do not read or understand English BEFORE they are
permitted to maintain and service these vessels. This manual should be readily available
to all people responsible for Operations and Maintenance.
Thank you for selecting products from Solberg Manufacturing, Inc. We are confident
that our superior filter designs will exceed your application requirements.
Section B
GENERAL INFORMATION
1. Identification of Solberg Scrubber/Separator Vessels
All Solberg vessels are equipped with an identification label/nameplate that lists the
following information:
Assembly Model #
Replacement Element # (If Applicable)
Vane Pack # (If Applicable)
Demister Pack # (If Applicable)