Special Projects Audio GXE lite User Manual

Page 16

Advertising
background image

E) Mix Output: 1/8 inch (3.5 mm) output for connecting to an external recorder or audio

system. For example, if you wish to record a presentation, an audio recorder could be
connected to the Mix Out. This would preserve your mix of relative levels (mic to
music).

F) Tone: Applies a tone control over the entire output. If your sound is 'muffled', try setting

the tone toward the High setting. If your sound is 'thin', try setting the tone toward the
Low setting.

G) Main On/Off/Volume: Controls the overall volume, preserving your relative mix/mic blend.

H) DC Input: Charging input. While charging, the green CG (charging) LED will flash,

turning solid when fully charged. During use, the red BL (battery level) LED will remain
solid. A flashing BL LED indicates an insufficient charge. It is very important that
you charge the unit every two weeks.
Lightweight lithium-ion batteries may be
damaged if completely discharged. Don't worry – the unit shuts off before the battery is
completely discharged. Just remember to never let the unit sit unused and uncharged
for more than two weeks.

I) Battery Compartment: Stores the lithium-ion battery pack. As the charger is built-in to the

unit, there is no need to remove the battery pack.

J) Shoulder Strap Anchors: Shoulder strap included.

14

Advertising
This manual is related to the following products:

GXE