Special Projects Audio MONSTER User Manual

Page 14

Advertising
background image

7. Evo True Wireless Headworn Transmitter

1. Microphone Element: Shown without the windscreen. Always be sure the side with the yellow

dot is toward the mouth. In the event that you experience a low audio level with excessive
feedback, check the direction of the microphone element. DO NOT twist the element.

2. Flexible Boom: Adjust so that the microphone element is at the corner or just under the mouth.

To prevent feedback, the Evo uses a noise-canceling element. Mic placement is very
important for a good experience.
If you notice the volume 'dip', check to be certain the
element is placed properly.

3. Power On/Off Switch: Turns transmitter power on and off. Press and hold one second to

power on, three seconds to power off. The LED will flash to indicate a change in power status.
After powering on, LED will flash red at 4-5 second intervals to indicate the Evo is on.

4. Channel Selector and Cover: Lift cover to set the transmitter channel via the rotary selector

with the included mini screwdriver. Always be certain that this cover is completely closed
prior to use
. Failure to do so may affect water resistance and void your warranty!

5. LED Indicator: Green indicates charging, single red indicates power ON, multiple red indicates

power OFF.

6. Adjustable Strap: The Evo headband is designed so that most users can comfortably use the

system with no adjustment. If you need a more snug fit, you may slip this strap forward. Also
see (7) below.

7. Recessed Antenna: Prior to use, always be certain the antenna is securely recessed into the

headband. If you need to adjust the strap, be certain the antenna is still properly recessed.

8. Form Fitting Headband: The Evo headband is designed for maximum comfort on most users

without adjustment. See points (6) and (7) for details. The headband will flex for comfort, but
don't test it's limits by spreading it wider than a human head! Really, we know someone out
there will...

9. Charging Connector and Cover: For use with the supplied external charging adapter. Be

certain to replace the cover before use – failure to do so may void your warranty.

12

Advertising