Special Projects Audio MONSTER - Manual (Page 6)

6. Group.X MONSTER Portable PA
The Group.X Monster is designed for use only with Ansr Audio / Special Projects 16-
channel selectable channel transmitters. The receiver operates in UHF 682-697 MHz f
requency band with PLL synthesized control.
6.1 Things to Remember:
–
Be certain that the Master volume is down before powering on
–
Be certain the Master volume is down before powering the wireless receiver on
–
Best practice is to leave the Monitor level all the way down unless you need it
If using an MP3 player, connect to the AUX inputs with a stereo 3.5 mm (mini jack or mini TRS)
to stereo RCA cable. Volume can then be controlled at the AUX volume knob.
Charge the batteries if needed – there is a battery meter on the rear panel
Before using the built-in wireless system, be certain the antenna is attached. You'll find
it packaged with the system accessories.
If you power the unit on with a CD already in the player, press the CD button on the player to
activate CD mode.
If you wish to have the music automatically lowered when you speak into the mic, set the
Music Mute switch to 'MUTE ON'. In a fitness class, you will likely want this set to 'MUTE OFF'.
Remember that the each component or input has it's own volume (wireless mic, wired mic, CD,
AUX). Set the blend as you want it, the use the MASTER volume to raise or lower your
blended mix to the desired level.
4