Sportline Hydracoach - Manual (Page 9)

Disassembling and Reassembling
the HydraCoach
The HydraCoach can be easily disassembled, and reassembled,
to change the battery, refi ll the bottle, replace a part, or to
clean. There are seven main components to the HydraCoach.
The exploded view illustration shows where each of these
parts locate in relation to one another, and explains how they
all fi t together. To ensure that the system works properly, it is
important that these components join to one another properly.
UPPER CAP ASSEMBLY AND BOTTLE
To remove the Upper Cap from the
Bottle, simply twist the outer threaded
Finger Ring in a counter-clockwise
direction. When the Finger Ring has
been unscrewed completely, you will be
able to lift the Upper Cap, along with
the attached Impeller/Tube Assembly,
up and off of the Bottle.
To replace the Upper Cap, position the Mouthpiece at the front
of the Bottle. The tabs on the Plug will automatically align with
the slots in the Bottle. Gently press the cap downward to ensure
that the tabs engage the slots, and then twist the Finger Ring in
a clockwise direction until the Upper Cap is fully screwed down
onto the Bottle for a snug and watertight fi t.
UPPER CAP AND IMPELLER ASSEMBLY
WITH TUBING
To remove the Impeller Assembly with
Tubing, simply grasp the hard plastic
housing of the Impeller Assembly and
pull it down and away from the Upper
Cap. The tabs in the rail of the Impeller
Assembly will disengage from the
notches on the rails of the Upper Cap.
9
SP3906IS0ISPORE.indd 9 3906IS0ISPORE.indd 9 10/20/08 4:38:01 PM 10/20/08 4:38:01 P