Char-Broil TRUINFRARED 463250512 - Manual (Page 18)

9
18
Position sideburner valve bracket beneath sideburner shelf fascia so that valve stem comes through larger
center hole in fascia. Align the holes on valve bracket with left and right holes on fascia. Secure using screws
and lock washers that were removed from bracket, shown A.
Attach sideburner bezel to fascia using two #8-32x3/8” fascia.
Place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on
B. Press sideburner control knob onto valve stem, shown
valve stem
#8-32x3/8”
4mm Lock
washer
screw
B
Note: Make sure to set the Bezel with
the longer slot at the top.
Sideburner Bezel
Control Knob
Valve bracket
A
Sideburner shelf Fascia
Sideburner shelf
Screws and washers
removed from
valve bracket
First, remove the two screws and lock washers attached to the sideburner valve bracket.
screws and 4mm lock washers.
Note: Use left and right holes
on fascia to attach valve bracket
Note: Use upper and lower holes
on fascia to attach bezel