StarTech.com SV1115IPEXEU - Manual (Page 12)

Instruction Manual
8
Configuring the SV1115IPEXT
SV1115IPEXT offers four distinct methods for configuring the unit for your network.
Which method will work best will depend on your level of experience and your specific
network configuration.
Web Configuration Using the On-Screen Display
Upon boot-up, including following a reset, SV1115IPEXT will display a window on the
local video output (front VGA connector), that will appear as follows:
The initial screen will display the IP address assigned by your existing DHCP server (if
present on your network). If no DHCP server is detected, a factory assigned IP address
will be displayed in its place (10.0.0.15 by default). Please make note of the assigned IP
address, as you will need to enter it into your web browser to access the Web Interface.
If static IP addresses are assigned, you will likely need to change the Net Mask, IP
Address and other details, prior to connecting via your Web browser. If this is the case,
connect a local keyboard (USB or PS/2) and press the Enter key. In order to proceed,
you will require an administrative username and password. By default, the username
and password are admin. You will be given the opportunity to change the password
(recommended) once the configuration is complete.