StarTech.com SV1115IPEXEU - Manual (Page 34)

Instruction Manual
30
Bribar Feature
Along the bottom of the VNC screen is a dark blue bar with various buttons known
as the bribar. Its purpose is to show a number of critical status values and to provide
shortcuts to commonly used features. Here is a snapshot of what it may look like. There
will be slight differences based on optional features and system configuration. Starting
from the left side of the Bribar, each feature and its function is outlined below.
Bandwidth: Indicates current average bandwidth coming out of the Server Remote
Control unit. The second number measures round trip time (RTT) of the connection
when it was first established.
Resync: Re-aligns the remote and local mouse points so they are on top of each other.
Redraw: Redraws the entire screen contents; occurs immediately.
PS/2: Resets the PS/2 keyboard and mouse emulation. Useful to recover failed mouse
and/or keyboard connections in PS/2 mode.
USB: Resets the USB connection by simulating an unplug and replug. Forces operating
system to recognize the USB keyboard, mouse and emulated disk drive.
ч4, ч8: Switches to thumbnail mode, at indicated size (i.e. 1/8th, 1/4)
Ctrl-Alt-Del: Sends this key sequence to the host. Works immediately.
Alt-F4: Sends the key sequence to host (closes windows).
KVM: Sends the KVM “hotkey” sequence. This function is only enabled when you have
configured the unit to expect a particular brand of KVM downstream. It sends the
key sequence to launch the KVM’s on-screen display (OSD) menu. This button is only
present when a KVM model is selected in the Web interface.
Menu: Shows the main menu.
Video: Shows the video-tuning menu where the picture quality can be adjusted.