StarTech.com SV1115IPEXEU User Manual
Page 15
Instruction Manual
11
To access the Web configuration for this product, you will need to configure the
workstation you are using to the same subnet (255.255.255.0) and also assign it a valid
IP address (i.e. 192.168.1.100). For details on how to change the IP address of your computer
(if necessary), consult your documentation or System Administrator for assistance.
NOTE: It is advisable to verify whether another device on your network is using the
same IP address as the SV1115IPEXT before connecting it to the network, to avoid a
conflict. Should an IP address conflict occur with another device on the network, power off
the conflicting device or assign it another IP address before continuing the installation.
If you are configuring more than a single SV1115IPEXT using the factory default
settings on the WAN port, they cannot be connected to the network at the same time
as they will use the same IP address.
NOTE: Not all IP addresses are valid for a given subnet. If you are required to change
your subnet (and therefore IP address) to configure the unit, be sure the IP address you
choose is within the allowable range for the 255.255.255.0 subnet.
Once your computer is configured to the same subnet as the SV1115IPEXT, you can use
the IP address 192.168.1.123 to access the Web configuration system.