StarTech.com PM1115P2 Full - Manual (Page 7)

Instruction Manual
5
Software Installation
Windows
1. To enable network communication with print server, your computer must have a
proper IP address, e.g. 192.168.0.100 (the print server’s default IP is 192.168.0.10)
2. Insert the setup CD into your CD/DVD drive.
3. Select Setup Wizard from the Autoplay menu. If Autoplay is disabled on your
system, browse to your CD/DVD drive and run the application.
Note: The setup CD will install the print server driver, PSAdmin and Setup Wizard
into your computer. The default installation directory will be C:\Program files\
Network Print Monitor
4. Click Next on the following screen and the wizard will automatically discover the
print server. At this point of the install, you may get a Windows Firewall message,
click Allow Access if prompted.