SUUNTO AMBIT - Manual (Page 31)

You can store up to 100 POIs in the device. Note that also routes take up this
quota. For example, if you have a route with 60 waypoints, you can additionally
store 40 POIs in the device.
You can select a POI type (icon) and POI name from a pre-defined list, or freely
name the POIs in Movescount. The pre-defined icons are listed in Chapter 16
Icons on page 100.
To save your current location as a POI:
1. Press [Start Stop] to enter the start menu.
2. Scroll to
LOCATION using [Start Stop] and enter with [Next].
3. The device starts searching for a GPS signal and displays GPS found after
acquiring the signal. Your current coordinates are now shown on the display.
4. Press [Start Stop] to save the location.
5. Select a suitable POI type for the location. Scroll through the POI types with
[Start Stop] or [Light Lock]. Select a POI type with [Next].
6. Select a suitable name for the location. Scroll through the name options
with [Start Stop] or [Light Lock]. Select a name with [Next].
7. Press [Start Stop] to save the POI.
31
en