SUUNTO AMBIT - Manual (Page 43)

6. Press [Next] to select Navigate.
7. If you selected a waypoint in the middle of the route, Suunto Ambit prompts
you to select the direction of the navigation. Press [Start Stop] to select
Forwards or [Light Lock] to select Backwards.
If you selected the first waypoint as the starting point, Suunto Ambit
navigates the route forward (from the first to the last waypoint). If you
selected the last waypoint as the starting point, Suunto Ambit navigates
the route backwards (from the last to the first waypoint).
8. If you are using the compass for the first time, you need to calibrate it. For
more information, see Section 10.1 Calibrating compass on page 57. After
activating the compass, the device starts searching for a GPS signal and
displays GPS found after acquiring the signal.
9. Start navigating to the first waypoint on the route. The device informs you
when you are approaching the waypoint and automatically starts navigating
to the next waypoint on the route.
10. Before the last waypoint on the route the device informs you that you have
arrived at your destination.
43
en