SUUNTO t4d - Manual (Page 22)

5 USING TRAINING MODE
The TRAINING mode handles measurement of all your training activity.
NOTE: Even though both Suunto t4d and the transmitter belt are water-resistant, the
radio signal does not carry in water, which makes the communication between Suunto t4d
and the transmitter belt impossible.
5.1 Putting on your transmitter belt
Put on the belt as illustrated and switch to TRAINING mode to start monitoring your
heart rate. Moisten both contact areas (1) with water or gel before putting the belt on.
Ensure the belt is centered on your chest.
21
en