SUUNTO T6 - Manual (Page 55)

54
3.5.6. Calibrating the wireless speed and distance sensor
To calibrate the wireless speed and distance sensor, first
cover a known distance using the stopwatch. Then
complete the following steps:
1.In the Speed/Distance menu, scroll to Calibrate and
press ENTER.
2.Press UP/DOWN to select the wireless speed and
distance sensor you want to calibrate and press ENTER.
3.Press UP/DOWN to select Calibrate.
4.Set the covered distance with UP/DOWN.
5.Press ENTER to finish calibration. The device
calculates and displays the calibration factor on the
second row of the display.
Alternatively, you can provide the calibration factor manually by scrolling with the UP/
DOWN buttons.
More information on calibrating your wireless speed and distance sensor can be
found in the User’s Guide for the wireless speed and distance sensor.
3.5.7. Pair
This function is identical to the Pair function described in section 3.4.7. Pair.