SUUNTO T6 - Manual (Page 68)

67
5.5. PC-INTERFACE
With the PC-interface cable you can transfer information between your Suunto t6 and
your computer. The interface cable is delivered in the same package with your
Suunto t6. The PC interface cable is plugged to the USB port of your computer, and
the other end of the cable clips on to your Suunto t6 with three docking points.
5.6. INSTALLATION
In order to use Suunto Training Manager you will need to install both the Suunto
Training Manager software and appropriate Suunto USB drivers.
5.6.1. Installing Suunto Training Manager
To install Suunto Training Manager:
1. Insert the Suunto Training Manager CD-ROM into the drive.
2. Wait for the installation to begin and follow the installation instructions.
NOTE: If the installation does not automatically start, click Start --> Run and type
D:\setup.exe.
5.6.2. Installing USB drivers for Suunto sport instruments
These instructions assume that you are installing Suunto sports Instrument drivers on
a clean system, i.e. one that does not contain any Suunto sports Instrument drivers. If
this is not the case, uninstall the previously installed drivers before proceeding with
the installation. See section 5.7 Uninstalling USB drivers for Suunto sport instruments
for more information.
WINDOWS 98
The installation is in two parts. First you install the drivers for the Suunto sports
instrument and then for the virtual USB serial port.