Using your cm-hs1 – Clarion BLT433 User Manual

Page 12

Advertising
background image

Using your CM-HS1

Answering a call

Whenever your car stereo is operating, the hand free module is in
standby mode awaiting the next call with the Blue LED showing, when
an incoming call arrives the car stereo is mute automatically and the ring
tone is reproduced through your car’s speaker. To answer the call press
the “Answer” button on the module and speak normally.

Your may also answer the call by using your phone’s answer keypad.
In this case, you can transfer the call to the module by following the
instruction in the next section.

Note: The Clarion CE-NET car stereo must set to telephone interrupt mode

to able work with the BLT433, details setting of the CE-NET car stereo
please refer the owner’s manual of each model.

To reject a call

When the car handsfree rings, long press the answer button.

Note: This dependent on the type of phone.

To turn off the microphone

During a call, long press or button to turn off the microphone. The
Red LED will blinking when the microphone has been turned off. Long
press or button again to un-mute the microphone.

Transferring a call

To transfer the sound to the car handsfree. During a call, short press the
answer button or using transfer call function in the phone.

To transfer the sound to the phone. During a call, long press the answer
button.

12

BLT433

English

Advertising