Clarion BLT433 - Manual (Page 8)

Introduction to Bluetooth
®
“pairing”
With a Bluetooth
®
mobile phone, you must ‘pair’ the module with the
phone before you use it for the first time.
‘Pairing’ creates a unique wireless link between the Bluetooth
®
phone
and your module eliminating the need to repeat the pairing process during
future use.
The Bluetooth
®
function in your phone has to be turned on to establish
automatic connection.
Before connecting BLT433 handsfree kit make sure these adjustments
on head unit "ADJ mode" :
-"Cellular phone interrupt setting" is "on"
-"Selecting AUX / TEL" is on "AUX" (requested only for unit with AUX
input)
Pairing your CM-HS1
Pairing the module
This module supports both Headset profile & Handsfree profile, the profile
support may differ from phone to phone. Please refer to mobile phone
user documentation for profile information.
Details on mobile phone compatibility and optimum setting visit
www.clarion-eu.com Note that some mobile phones will not operate
correctly if paired in the wrong mode.
To pair a mobile phone follow the step below:
1. Turn on your module by powering up the car audio system, note
the Blue LED is lit to confirm that the power is on.
2. Switch on your handphone Bluetooth
®
function.
8
BLT433
English