Clarion BLT433 - Manual (Page 22)

Additional information
22
BLT433
Installation
Please note that only authorised personnel should install the Bluetooth
®
car handsfree. Please check with your car dealer for recommendations
on professional installation engineers. Check with your car manufacturer’s
representative to be sure that all equipment for the
Bluetooth
®
car
handsfree, including additional accessories, is placed in a safe location.
If your car is equipped with an air bag, check that the handsfree equipment
does not interfere with its function.
The Bluetooth
®
car handsfree equipment is made for use in cars with a
12 volt electrical system. Other supply voltages may cause damage to
the equipment.
Radio frequency exposure
Your Bluetooth
®
car handsfree is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth
®
equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic fields
(microwaves) in the frequency range 2400 to 2500 MHz. The output
power of the radio transmitter is low, 0.001 watt.
Your Bluetooth
®
car handsfree is designed to operate in compliance with
the RF exposure guidelines and limits set by national authorities and
international health agencies when used with any compatible
Bluetooth
®
enable mobile phone.
Driving
Check the laws and regulations on the use of mobile phones and
handsfree equipment in the areas where you drive.
Always give full attention to driving and pull off the road and park before
making or answering a call if driving conditions so require.
English