TC-Helicon Play Acoustic - Reference Manual - Manual (Page 24)

Connection diagrams
Play Acoustic – Reference manual (2014-07-16) 22
Stereo (or mono) vocals and guitar
This diagram shows connections for both Stereo
and Mono PA applications.
If your Play Acoustic is set to Stereo, you’ll need
to pan one channel left and the other channel
right (or use a single Stereo channel) on your
mixer. Vocal/Guitar level mix is achieved within
Play Acoustic.
In Mono output mode, you have control over the
vocal and guitar sounds independently at the PA
mixer. In Mono mode, do not pan the channels
left and right.
The Aux input may be removed from the XLR
outputs in the setup menu if you wish (Setup –
Aux to Main Out).
PLAY ACOUSTIC
Setup example: Stereo (or mono) vocals and guitar