TC-Helicon VoiceLive Rack Full User's Manual - Manual (Page 75)

74
The Edit Button
f PATH
When this is set to POST, the captured sample
will be a composite of all effects that were on
when it was captured. When set to PRE the
sample is captured dry but effects can be added
and removed as the sample continues to loop.
from SQUARE to SAWTOOTH DOWN. The
SAMPLE AND HOLD option produces a ran-
dom value on every beat division. Following these
are the syncopated one bar patterns. When a
syncopated pattern is selected, the division value
shows N/A.
MODE = SAMPLE
f SAMPLE LOOP DIVISION
Divisions of the Tap Tempo beat can be sampled
and repeated to create coarse-to-fine, short du-
ration looping effects.
Sets the repeating length from quarter notes to
finer resolutions.
1/4
1/4 TRIP
1/8 DOT 1/8 1/8 TRIP
1/16 DOT 1/16 1/16 TRIP
1/32 DOT 1/32 1/32 TRIP
f SAMPLE LOOP CAPTURE
Defines when the sample is captured:
1. START: Starts recording when the Rhythmic
button is pressed.
2. END: In the moments leading up to pressing
the Rhythmic button.
In the case of #2, the length of time is deter-
mined by combination of the SAMPLE LOOP
DIVISION and the current tempo.
f SAMPLE DIRECTION
Samples can play forward or reverse. This effect is
most noticeable on longer duration samples.