TeeJet LH 1000 - Manual (Page 9)

LH 1000 O PERATORS & F ITTING MANUAL O PERATING THE LH 1000
LH A GRO 9
OPERATING THE LH 1000
FUNCTION SET 1
WORK TIME IN HOURS AND MINUTES
Key Function
Pressing this key displays the effective work time (max. 99 hours 59
minutes)
The time counter is started and stopped by pressing the key.
Flashing colon >:< means that the time counter is running.
Constant colon >:< means that the time counter is stopped.
Pressing this key for min. 3 seconds resets the counter.
AREA TRIP & TOTAL COUNTERS
The area counters start and stop automatically when the implement is in work/not
in work (implement sensor) and continue to count regardless of what other
function in function set 1 has been selected. Area is not being measured if an >r<
is displayed on the screen.
Key Function
Trip counter:
Pressing this key displays the area covered in ha with 2 decimals from 0
to 99.99 ha and with 1 decimal from 100 to 999.9 ha.
Pressing this key for min. 3 seconds resets the counter.
Total counter:
Pressing this key displays the total area covered in ha with 2 decimals
from 0 to 99.99 ha and with 1 decimal from 100 to 999.9 ha.
This function can be used to sum area covered for, i.e. a month.
Pressing this key for min. 3 seconds resets the counter.
FORWARD SPEED
Key Function
Pressing this key displays the present forward speed in kilometres per
hour with 1 decimal.
Forward speed is always displayed when the monitor is switched on.
An “r” on the left-hand side of the display under this function, indicates
that the area override sensor has been activated.
Forward speed is zeroed after approx. 8 second after stopping.