TeeJet FieldPilot Install John Deere 8x00 - Manual (Page 11)

www.teejet.com
10
FieldPilot ®
2. MOUNT THE VALVE BRACKET ON THE VEHICLE
Find the two holes in the rear casting gusset plate on the right side of the tractor. Using the two bolts (G)
with nuts (H) and washers (B) , attach the bracket (I) so that the mounting holes for the valve are up and to
the rear.
Figure 1-3: Mount the Valve Bracket
3. INSTALL FIELDPILOT VALVE ON MOUNTING BRACKET
Using the bolts and nuts (G) and (C) attach the FieldPilot valve to the bracket (I) so that Electronic actuator
is positioned to the rear and the manual adjust knob is positioned toward the center of the tractor.
Figure 1-4: Install Mounting Bracket on FieldPilot Valve