Fieldpilot, Install adapter z here – TeeJet FieldPilot Install John Deere 9x00-9x20 User Manual
Page 27
Advertising
23
FieldPilot
®
98-05217 R3
12. install the Pressure sWitch, hYdraulic adaPter,
and caBle
The pressure switch and adapter will install in the LS line from the orbital. Follow the LS line from the orbital to
where it connects to the priority valve underneath the machine. Disconnect the LS line and install adapter
(Z)
.
Then install the Pressure Switch
(II)
into adapter
(Z)
. Next, connect cable
(D)
from the pressure switch to the
SCM harness cable labeled STEERING WHEEL SWITCH.
Figure 1-25: Installing the Pressure Switch, Hydraulic Adapter, and cable
install adapter Z here
Advertising