TeeJet FieldPilot Install Willmar 7200/50 & 7400/50 - Manual (Page 11)

www.teejet.com
10
FieldPilot ®
1. PrePare the FieldPilOt ValVe
Install adapters (P) in the EF & P ports. Install adapters (R) in the A & B ports. Install adapter (S) in the
T port. Then attach adapters (Q) to (R) in the A & B ports. Finally attach adapter (O) to (P) in the EF port.
Figure 1-4: Prepare the FieldPilot Valve
2. install the FieldPilOt ValVe Bracket
Locate the two bolts above the axle on the right side next to the muffler. Install the mounting bracket (H)
next to the muffler using the existing bolts.
Figure 1-5: Install Mounting Bracket for FieldPilot Valve
r
p
o
p
s
Q
r
Q
existing bolts