TeeJet FieldPilot Install Willmar 7200/50 & 7400/50 - Manual (Page 15)

www.teejet.com
14
FieldPilot ®
7. install the ValVe cOntrOl caBle
Connect the valve control cable (E) to the FieldPilot valve and route it into the cab.
Figure 1-10: Install the Valve Control Cable
8. installatiOn OF engage/disengage switch
Connect item (A) to the connector on the SCM harness labeled Remote Engage/Disengage. Install the push
button in a location that is easily accessible during operation of the machine. This switch (A) is not required
if the optional foot switch 32-04020 is used.
Figure 1-11: Engage/Disengage Switch