TL Audio 5060 - Manual (Page 21)

17
Serial Number.............................
Date purchased...........................
Dealer.........................................
7. SPECIFICATIONS
Inputs:
Balanced line inputs, switchable for +4dBu / -10dBu nominal level.
Unbalanced instrument inputs, input impedance 1Megohm.
Balanced microphone input, common to both channels.
Outputs:
Balanced line outputs, switchable for +4dBu / -10dBu nominal level.
Unbalanced line outputs, switchable for +4dBu / -10dBu nominal level.
Maximum Levels:
Line inputs +26dBu,
Instrument inputs +10dBu,
Mic input +30dBu,
Balanced outputs +26dBu,
Unbalanced outputs +20dBu.
Gain Range: Line
inputs +/-20dB,
Instrument inputs 0 to +40dB,
Mic input switchable -20dB to +40dB with +/-20dB trim.
Output fader +15dB maximum gain.
Frequency Response:
All inputs 10Hz to 40KHz, +0/-2dB.
High Pass Filter:
-3dB @ 90Hz, -12dB per octave.
Distortion (THD+N): Typically 0.1% @ 0dBu, rising to 0.3% @ +15dBu (1KHz).
Hum and Noise:
-84dBu, 22Hz - 22KHz, line input @ 0dB gain,
-82dBu, 22Hz - 22KHz, instrument input @ +20dB gain,
-122dBu (EIN) mic input at +60dB gain, 22Hz - 22KHz.
Compressor:
Stereo compressor with manual and programmed controls,
Threshold continuously variable -20dBu to +10dBu,
Ratio continuously variable 1:1.5 to 1:30,
Attack switchable 0.5ms or 5ms,
Release switchable 0.2s or 1.5s,
Knee switchable “Hard” or “Soft”.