Toa S-D7802 - Manual (Page 36)

36
17. SPECIFICATIONS
Power Source 100 – 240 V AC, 50/60Hz
Power Consumption 500 mA or less
Frequency Range 606 – 638 MHz
Antenna Input 1 input, BNC jack, 50 Ω, 2 channels
Antenna power supply: 9 V DC, 90 mA (max.)
Antenna Cascade Output 1 output, BNC jack, 50 Ω, 2 channels
Receiving Sensitivity 30 dBμV or less (Bit error rate: 1E-5 or less)
Antenna Input Attenuator 0 dB/−10 dB/−20 dB switchable
Modulation System PLL synthesized
Receiving System Double Superheterodyne, digital diversity system
Frequency Response 20 Hz – 15 kHz
D/A Converter Resolution 24 bits, 48 kHz sampling
Coding System ADPCM (TRANTEC original)
Audio Latency 4 ms or less
(when using in conjunction with the optional S-D7200 or S-D7300)
Analog Audio Output Connector XLR 3-32 equivalent: Balanced output
2-pole jack: Unbalanced output
Analog Audio Maximum Output
Level
Balanced output:
20 dB* 1 or more (LINE)/0 dB* 1 or more (MIC) switchable
Unbalanced output:
14 dB* 1 or more (LINE)/−6 dB* 1 or more (MIC) switchable
Dynamic Range (AF Circuit) 110 dB or more (A-weighted)
Total Harmonic Distortion 0.05% or less (at 30 dBμV, 1 kHz, −10 dBFS* 2 , A-weighted)
Maximum Mixing Output Level 10 dB* 1 or more, unbalanced, 2-conductor phone jack
Mixing Input −10 dB* 1 , unbalanced, 2-conductor phone jack
Headphones Output 500 mW, 16 Ω, 3-conductor phone jack
AES/EBU Output 24-bit output (internal 48 kHz, external word clock sync)
XLR 3-32 equivalent, 110 Ω, balanced output
Word Clock Input 32 – 96 kHz, BNC jack, 75 Ω terminated/Open switchable
Transmitter Information Display Remaining battery level, microphone gain setting information, and other
information
ID Selectable 10 patterns
Network Ethernet, RJ-45
Operating Temperature −10 to +50ºC
Operating Humidity 30% to 85% RH (no condensation)
Finish Panel: Aluminum, hairline, black, alumite
Case: Surface-treated steel plate, black, paint
Dimensions 482 (w) x 44 (h) x 362.6 (d) mm
Weight 4.1 kg
* 1 0 dB = 0.775 V, * 2 0 dBFS = 24-bit full scale output
Note: The design and specifications are subject to change without notice for improvement.
Accessories
AC power cord (2 m) ....................................... 1
BNC plug cord (50 cm) ................................... 1
Front mount cord with BNC plug (65 cm) ....... 2
Direct mount antenna ..................................... 2
Phone plug cord (1 m) .................................... 1
CD (Monitoring software) ............................... 1
Rack mounting screw 5 x 12 .......................... 4
Rack mounting washer ................................... 4
Rubber foot ..................................................... 4
Ferrite clamp .................................................. 1