Toa WA-1822C - Manual (Page 15)

15
9.5. Cue
The cassette deck features a cue function that automatically locates the silent tape section between recorded
selections to play each selection from its beginning.
Play button
Fast forward/rewind buttons
Step 1. Press the Play button [ ] to play the tape.
Step 2. To cue the selection being played, press the Rewind button [ ]. While, to cue the next selection,
press the Fast-forward button [ ]. The deck finds an unrecorded section of the tape to
automatically play back.
Notes
• When the Play button [
] is pressed for playback in Step 1 above, the [ ] button functions as Rewind
button and the [ ] functions as the Fast-forward button.
• Only 1 selection at a time is available for cue.
• Unrecorded section must be of at least 3 seconds in length to permit cue. It is highly recommended that
unrecorded section of over 5 seconds in length be created between selections.
• To create unrecorded section of the tape, continue recording with all input volume controls set to minimum
("0" position).
• If the recorded selection has an extremely low recording level in a section, the section may be misconstrued
to be a silent section from which playback will automatically start.
• If the Fast forward or rewind button is pressed for cue during playback pause, the deck will maintain the
pause mode after locating the beginning of the selection.