Toa WA-1822C - Manual (Page 16)

16
9.6. About Operating Modes
The WA-1822C Meeting Amplifier's tape deck has 3 modes of tape operation.
• One-way mode [ ] : Records or plays back only one side of the tape, and stops the tape at its end.
• Return mode [ ] : Records or plays back both sides of the tape, and stops the tape at the end of its
return.
• Endless mode [ ] : Continuously plays the tape, switching from side to side at tape end. Note, however,
that during recording this mode has the same operation as Return mode.
Select the desired tape operation mode with the Operating mode selector switch.
Operating mode
selector switch
The following table shows tape operation when the Operating mode selector switch and other buttons are
pressed.
Operating mode Depressed button Tape operation
• Playback
Step. 1
Tape plays. Stops at tape end.
Step. 2
Step. 1
Tape plays.
Tape plays.
Stops at tape end.
Step. 2
Step. 1
Automatically reverses
at tape end.
Step. 2 Step. 3
Tape plays. Stops at tape end.
Step. 4
Tape plays.
Step. 1
Automatically reverses
at tape end.
Step. 2 Step. 3
Tape plays. Stops at tape end.
Step. 4
Tape plays.
Step. 1
Automatically reverses
at tape end.
Step. 2 Step. 3
Tape plays.
Automatically reverses
at tape end.
Step. 4
Tape plays.
Step. 1
Automatically reverses
at tape end.
Step. 2 Step. 3
Tape plays.
Automatically reverses
at tape end.
Step. 4