Toa N-8000CO - Manual (Page 13)

13
[General description of connection]
For cables, refer to p. 14.
1. Power supply connection
Connect the supplied power supply cord to AC
Mains or a UPS (Uninterruptible power supply).
About power supply cord handling
The supplied power supply cord is designed for
exclusive use with the N-8000CO.
Use the supplied power supply cord only with the
N-8000CO.
2. C/O line connection
Connect the C/O line to the PSTN (public switched
telephone network) using the supplied mini-clamp
connector.
(Refer to p. 14, "Connector Connection.")
To reduce the rick of fire, use only No.26 AWG
or larger telecommunication line cord.
CAUTION
3. Network connection
Can be connected to a network of 10BASE-
T/100BASE-TX in auto-sensing.
Use a straight through cable of UTP category 5 or
more for this connection.
ATTENTION
Pour réduire le risque d’incendie, utilisez
uniquement un cordon de ligne téléphonique
AWG n°26 ou plus.