Toa N-8000CO - Manual (Page 15)

15
7. ACCESSORIES
* Contains the N-8000 setting software program and the N-8000 series instruction manual. The Setup
Launcher is automatically started when the supplied CD-ROM is inserted into the PC's drive.
Note
If your PC's CD drive is not compatible with the AutoRun function, the setup guide is not automatically started
even when the CD is inserted. Use either "Explorer" or "My Computer" to execute the following files, or use
[Start Run] in the Task Bar and enter the following command.
<Drive where CD is placed> \index.html
For example, when placing the CD in the "d" drive, d:\index.html
8. OPTIONAL PRODUCTS
AC power cord (2 m) ............................................... 1
CD* (for PC setting, maintenance use) .................. 1
Mini-clamp connector (2P) ..................................... 2
Plastic foot .............................................................. 4
Machine screw M3 x 8 ............................................ 4
Rack mounting bracket: MB-15B-BK (for rack mounting one N-8000CO unit)
MB-15B-J (for rack mounting two N-8000CO units)
Wall mounting bracket: YC-850
• Download our TOA Products Data, web site (http://www.toa-products.com/international/) to get the
up-to-date version for N-8000 software, firmware, and Instruction manuals.
• The software version number can be confirmed using the Help menu.
• The current firmware version can be confirmed on the system management screen displayed when
the browser establishes the connection to the C/O interface unit.
• The instruction manual version number can be confirmed by checking the preparation date (month
and year) shown at the lower right corner of the last page.
Example: Prepared in January 2010: 201001
Version update information